Netgear M4300-12X12F (XSM4324S) - Stackable Managed Switch with 24x10G including 12x10GBASE-T and 12xSFP+ Layer 3 User Manual

By default, the stack ports on each switch are configured for stacking. However, you can use 
these ports as standard Ethernet ports. Use the Stack Port Configuration page to configure 
the mode of the stack ports and to view information about the ports.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select System > Stacking > Advanced > Stack Port Configuration. 

Unit ID

The unit ID of the specific switch.

Switch Description

The description for the unit that is configured by the user.

Serial Number

The unique box serial number for this switch.

Up Time

The relative time since the last reboot of the switch.

Preconfigured Model Identifier

The model type assigned by the device manufacturer to identify the 
device.

Plugged-In Model Identifier

The model type assigned by the device manufacturer to identify the 
plugged-in device.

Detected Code Version

The detected version of code on this unit.

Detected Code in Flash

The release number and version number of the code stored in flash.

SFS Last Attempt Status

The stack firmware synchronization last attempt status.