Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch User Manual

The fields in the following table are visible only when Summer Time is Non Recurring.

Begins At

The fields under this are used to configure the Start values for the date 
and time.

Week. This field is used to configure the start week.

Day. This field is used to configure the start day.

Month. This field is used to configure the start month.

Hours. This field is used to configure the start hours.

Minutes. This field is used to configure the start minutes.

Ends At

The fields under this are used to configure the End values for the date 
and time. 

Week. This field is used to configure the end week.

Day. This field is used to configure the end day.

Month. This field is used to configure the end month.

Hours. This field is used to configure the end hours.

Minutes. This field is used to configure the end minutes.

Offset 

This field is used to configure the recurring offset.

Zone 

This field is used to configure the Zone.

Click the APPLY button.

The settings are sent to the switch. Configuration changes take effect immediately. These 
changes are not retained across a power cycle unless you save the configuration. See 

You can configure the information about DNS servers that the network uses and how the 
switch operates as a DNS client.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 
example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 
the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password.