Netgear M4100-50G (GSM7248v2h2) - 46‐port GE + 4 GE Combo L2 Managed Switch User Manual
Configure System Information
48
M4100 Series Managed Switch
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select System
Management
DNS
DNS Configuration.
8.
Specify whether to enable or disable the administrative status of the DNS client.
•
Enable. Allow the switch to send DNS queries to a DNS server to resolve a DNS
domain name. The default value is Enable.
domain name. The default value is Enable.
•
Disable. Prevent the switch from sending DNS queries.
9.
Enter the DNS default domain name to include in DNS queries.
When the system is performing a lookup on an unqualified host name, this field is
provided as the domain name (for example, if the default domain name is netgear.com
and you enter test, then test is changed to test.netgear.com to resolve the name). The
length of the name must not be longer than 255 characters.
provided as the domain name (for example, if the default domain name is netgear.com
and you enter test, then test is changed to test.netgear.com to resolve the name). The
length of the name must not be longer than 255 characters.
10.
Use Retry Number to specify the number of times to retry sending DNS queries to the DNS
server.
server.
This number ranges from 0 to 100. The default value is 2.
11.
Use Response Timeout (secs) to specify the amount of time, in seconds, to wait for a
response to a DNS query.
response to a DNS query.
This time-out ranges from 0 to 3600. The default value is 3.
12.
Specify the Source Interface that is used for DNS.
Possible values are as follows:
•
Routing interface
•
Routing VLAN
•
Routing loopback interface