Netgear M4100-50-POE (FSM7250Pv1h1) - 48‐port FE + 2 GE Combo L2 Managed PoE Switch Software Guide
Quality of Service Commands
313
M4100 Series ProSAFE
Managed
Switches
auto-voip oui
This command is used to configure an OUI for Auto VoIP. The traffic from the configured OUI
will get the highest priority over the other traffic.
will get the highest priority over the other traffic.
no auto-voip oui
This command is to delete already configured OUI.
auto-voip vlan
This command is used to configure the global auto VoIP VLAN ID. The VLAN behavior
depends on the configured auto VoIP mode.
depends on the configured auto VoIP mode.
no auto-voip vlan
This command is used to remove the configured auto VoIP mode.
auto-voip oui-based priority
This command is used to configure the global OUI based auto VoIP priority. If the phone OUI
is matches one of the configured OUI, the priority of traffic from the phone is changed to OUI
priority configured through this command.
is matches one of the configured OUI, the priority of traffic from the phone is changed to OUI
priority configured through this command.
Default
A list of known OUIs is present
Format
auto-voip oui <oui-prefix> oui-desc <string>
Mode
Global Config
Format
no auto-voip oui <oui-prefix>
Mode
Global Config
Default
None
Format
auto-voip vlan <vlan-id>
Mode
Global Config
Format
no auto-voip vlan
Mode
Global Config
Default
Highest available priority
Format
auto-voip oui-based priority <priority-value>
Mode
Global Config