Netgear M4100-50-POE (FSM7250Pv1h1) - 48‐port FE + 2 GE Combo L2 Managed PoE Switch Software Guide
Quality of Service Commands
314
M4100 Series ProSAFE
Managed
Switches
no auto-voip oui-based priority
This command is used to set the priority to the default value.
auto-voip protocol-based
This command is used to configure the global protocol based auto-VoIP remarking
priority/traffic-class. If the remark priority is configured, the voice data of the session is
remarked with the priority configured through this command.
priority/traffic-class. If the remark priority is configured, the voice data of the session is
remarked with the priority configured through this command.
Note:
You must enable tagging on auto-VoIP-enabled ports to remark the
voice data when it is egressed.
voice data when it is egressed.
•
Global Config
•
Interface Config
no auto-voip protocol-based {remark | traffic-class}
This command is used to set the traffic-class to the default value.
•
Global Config
•
Interface Config
show auto-voip
Use this command to display the auto VoIP settings on the interface or interfaces of the switch.
Format
no auto-voip oui-based priority <priority-value>
Mode
Global Config
Default
Traffic-class 7
Format
auto-voip protocol-based {remark <remark-priority> | traffic-class
<tc>}
Mode
Format
no auto-voip protocol-based {remark <remark-priority> |
traffic-class <tc>}
Mode
Format
show auto-voip {protocol-based | oui-based} interface {<slot/port>
| all}
Mode
Privileged EXEC
Field
Description
VoIP
The global VoIP VLAN ID.
Prioritize Type
The type of prioritization used on voice traffic.