Netgear GS728TPS(B) – ProSAFE 24-Port Gigabit Stackable Smart Switch with PoE and 4 SFP uplinks Software Guide

The current number of the IP ACLs configured on the switch is displayed in the Current 
Number of ACL area. The maximum number of IP ACL that can be configured on the switch 
is displayed in the Maximum ACL field, depending on the hardware. The name of IPv6 ACL 
can be configured in IPv6 ACL field. The number of the rules associated with the IP ACL is 
displayed in the Rules field. The ACL type is IPv6 ACL and displayed in the Type field.

To add an ACL, type a name in the IPv6 ACL field, and then click Add.

To delete an ACL, select the check box associated with the ACL, and then click Delete.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 
the latest value of the switch.

If you modify the IPv6 ACL name, click Apply to submit the changes to the switch.

IPv6 Rules

Use the IPv6 Rules page to configure the rules for the IPv6 Access Control Lists. The IPv6 
Access Control Lists are created using the IPv6 Access Control List Configuration page. By 
default, no specific value is in effect for any of the IPv6 ACL rules.

To display the IPv6 Rules page, click Security 





 IPv6 Rules. In the 

following figure, an IPv6 rule exists, and one rule has been configured.