Netgear FSM7352S – ProSAFE 48 Port 10/100 L3 Managed Stackable Switch with 4 Gigabit Ports Hardware Manual

2-4

Introduction

The rear panel has a console port and a standard AC power receptacle for the 
supplied power cord.

Power

Solid green: Power is supplied, and the switch is operating normally. 
Blinking green: Runtime code load in progress.
Solid yellow: Power-On Self-Test (POST) in progress. 
Blinking yellow: POST failure or CPU failure. 
Off: Power is disconnected.

10/100M ports 
One LED per port   

 

Link/ACT/SPD LED 
• Off: No 10/100 Mbps link is established on the port. 
• Solid green: A valid 100 Mbps link is established on the port. 
• Blinking green: The port is sending or receiving packets at 

100Mbps. 

• Solid yellow: A valid 10 Mbps link is established on the port. 
• Blinking yellow: The port is sending or receiving packets at 10 

Mbps. 

10/100/1000M 
ports 
Three LEDs per 
port 

Link/ACT LED 
• Off: No 10/100/1000 Mbps link is established on the port. 
• Solid green: A valid 1,000 Mbps link is established on the port. 
• Solid yellow: A valid 10/100 Mbps link is established on the port. 
• Blinking green: The port is sending or receiving packets at 

 

1,000 Mbps. 

• Blinking yellow: The port is sending or receiving packets at 

 

10/100 Mbps. 

Stack LED 
• Green: Stack port has a valid link connection. 
• Off: Stack port does not have a valid link connection.

SFP Port 

 

(1,000 Mbps only) 

• Solid green: Link is up. 
• Blinking green: The port is sending or receiving packets in link up 

status.

• Off: No link is detected.

Power receptacle

Console port