Netgear M4300-52G-PoE+ (GSM4352PA) - 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (550W PSU) Software Guide
Switching Commands
437
M4200 and M4300 Series ProSAFE Managed Switches
no set garp timer leave
This command sets the GVRP leave time on all ports or a single port to the default and only
has an effect when GVRP is enabled.
has an effect when GVRP is enabled.
set garp timer leaveall
This command sets how frequently Leave All PDUs are generated. A Leave All PDU
indicates that all registrations will be unregistered. Participants would need to rejoin in order
to maintain registration. The value applies per port and per GARP participation. The time
may range from 200 to 6000 centiseconds. The value 1000 centiseconds is 10 seconds. You
can use this command on all ports (Global Config mode), or on a single port or a range of
ports (Interface Config mode) and it only has an effect only when GVRP is enabled. The
leave all time must be greater than the leave time.
indicates that all registrations will be unregistered. Participants would need to rejoin in order
to maintain registration. The value applies per port and per GARP participation. The time
may range from 200 to 6000 centiseconds. The value 1000 centiseconds is 10 seconds. You
can use this command on all ports (Global Config mode), or on a single port or a range of
ports (Interface Config mode) and it only has an effect only when GVRP is enabled. The
leave all time must be greater than the leave time.
no set garp timer leaveall
This command sets how frequently Leave All PDUs are generated the default and only has
an effect when GVRP is enabled.
an effect when GVRP is enabled.
show garp
This command displays GARP information.
Format
no set garp timer leave
Mode
Interface Config
Global Config
Default
1000
Format
set garp timer leaveall centiseconds
Mode
Interface Config
Global Config
Format
no set garp timer leaveall
Mode
Interface Config
Global Config
Format
show garp
Mode
Privileged EXEC
User EXEC