Netgear M4300-52G-PoE+ (GSM4352PA) - 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (550W PSU) Software Guide
IPv6 Commands
876
M4200 and M4300 Series ProSAFE Managed Switches
show ipv6 ospf virtual-link brief
This command displays the OSPFV3 Virtual Interface information for all areas in the system.
DHCPv6 Commands
This section describes the commands you use to configure the DHCPv6 server on the
system and to view DHCPv6 information.
system and to view DHCPv6 information.
service dhcpv6
This command enables DHCPv6 configuration on the router.
no service dhcpv6
This command disables DHCPv6 configuration on router.
Format
show ipv6 ospf virtual-link brief
Modes
Privileged EXEC
User EXEC
Term
Definition
Area ID
The area id of the requested OSPFV3 area.
Neighbor
The neighbor interface of the OSPFV3 virtual interface.
Hello Interval
The configured hello interval for the OSPFV3 virtual interface.
Dead Interval
The configured dead interval for the OSPFV3 virtual interface.
Retransmit Interval
The configured retransmit interval for the OSPFV3 virtual interface.
Transmit Delay
The configured transmit delay for the OSPFV3 virtual interface.
Default
enabled
Format
service dhcpv6
Mode
Global Config
Format
no service dhcpv6
Mode
Global Config