Netgear M4300-8X8F (XSM4316S) - Stackable Managed Switch with 16x10G including 8x10GBASE-T and 8xSFP+ Layer 3 User Manual

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Switching

> VLAN > Advanced > Voice VLAN Configuration. 

Select the Admin Mode Disable or Enable radio button.

This specifies the administrative mode for voice VLAN for the switch. The default is 
Disable.

Use Interface to select the physical interface.

Use Interface Mode to select the voice VLAN mode for selected interface:

. This is the default value.

. Allow the IP phone to use its own configuration to send untagged voice traffic.

. Configure the phone to send tagged voice traffic.

Configure voice VLAN 802.1p priority tagging for voice traffic. When this is 

selected, enter the dot1p value in the Value field.

. Configure the phone to send untagged voice traffic.

Use Value to enter the VLAN ID or dot1p value. 

This is enabled only when VLAN ID or dot1p is selected as the interface mode.

In the CoS Override Mode field, select Disable or Enable.

The default is Disable.

In the Authentication Mode field, select Enable or Disable.

The default is Enable. When the authentication mode is enabled, voice traffic is allowed 
on an unauthorized voice VLAN port. When the authentication mode is disabled, devices 
are authorized through dot1x. 

Authentication through dot1x is possible only if dot1x is enabled.