Netgear M4300-8X8F (XSM4316S) - Stackable Managed Switch with 16x10G including 8x10GBASE-T and 8xSFP+ Layer 3 User Manual
Configure Switching Information
188
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure GARP Port
Note:
It can take up to 10 seconds for GARP configuration changes to take
effect.
effect.
To configure GARP port:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching
> VLAN > Advanced > GARP Port Configuration.
6.
Use Interface to select the physical interface for which data is to be displayed or configured.
7.
In the Port GVRP Mode field, select Enable or Disable.
This specifies the GARP VLAN registration protocol administrative mode for the port.If
you select Disable, the protocol is not active and the join time, leave time, and leave all
time have no effect. The factory default is Disable.
you select Disable, the protocol is not active and the join time, leave time, and leave all
time have no effect. The factory default is Disable.
8.
In the Port GMRP Mode field, select Enable or Disable