Netgear FVS318N – Prosafe Wireless N VPN Firewall Leaflet

FVS318N> system remote_management https configure 

system-config[https]> ip_version IPv4 

system-config[https]> enable_ipv4 Y 

system-config[https]> access_type Everyone 

system-config[https]> port 445 

system-config[https]> save

This command configures remote management over Telnet. After you have issued the 
system remote_management telnet configure

 command, you enter the 

system-config [telnet] mode, and then you can configure one keyword and associated 
parameter or associated keyword at a time in the order that you prefer.

You can configure remote management over Telnet for both IPv4 

and IPv6 connections because these connections are not mutually 
exclusive.

system

access_type {Everyone | IP_Range {from_address <ipaddress>} 

   {to_address <ipaddress>} | To_this_PC_only {only_this_pc_ip 

   <ipaddress>}}

access_type6 {Everyone | IP_Range {from_address6 

   <ipv6-address>} {to_address6 <ipv6-address>} | 

   To_this_PC_only {only_this_pc_ip6 <ipv6-address>}}

system-config [telnet]

system remote_management telnet configure 

ip_version {IPv4 | IPv6}

enable_ipv4 {Y | N}

enable_ipv6 {Y | N}

 or IPv6

Specifies the configuration of IPv4 or IPv6.