Netgear FVS318N – Prosafe Wireless N VPN Firewall Leaflet
VPN Mode Configuration Commands
255
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
L2TP Server Commands
vpn l2tp server configure
This command configures the L2TP server. After you have issued the vpn l2tp server
configure
configure
command, you enter the vpn-config [l2tp-config] mode, and then you can
configure one keyword and associated parameter or associated keyword at a time in the
order that you prefer.
order that you prefer.
Step 1
Format
Mode
vpn
Step 2
Format
enable {Y | N}
start_address <ipaddress>
end_address <ipaddress>
idle_timeout <minutes>
Mode
vpn-config [l2tp-config]
Keyword
Associated Keyword to
Select or Parameter to Type
Select or Parameter to Type
Description
Y
or N
Enables or disables the L2TP server.
The start IPv4 address of the L2TP server range.
The end IPv4 address of the L2TP server range.
The idle time-out after which the connection is terminated.
Command example:
FVS318N> vpn l2tp server configure
vpn-config[l2tp-config]> enable Y
vpn-config[l2tp-config]> start_address 192.168.112.1
vpn-config[l2tp-config]> end_address 192.168.112.25
vpn-config[l2tp-config]> idle_timeout 10
vpn-config[l2tp-config]> save
Related show command:
vpn l2tp server configure
enable
start_address
ipaddress
end_address
ipaddress
idle_timeout
minutes