Netgear FVS318N – Prosafe Wireless N VPN Firewall 전단

L2TP Server Commands

This command configures the L2TP server. After you have issued the vpn l2tp server 
configure

 command, you enter the vpn-config [l2tp-config] mode, and then you can 

configure one keyword and associated parameter or associated keyword at a time in the 
order that you prefer.

vpn

enable {Y | N}

start_address <ipaddress>

end_address <ipaddress>

idle_timeout <minutes>

vpn-config [l2tp-config]

 or N 

Enables or disables the L2TP server.

The start IPv4 address of the L2TP server range.

The end IPv4 address of the L2TP server range.

The idle time-out after which the connection is terminated.

FVS318N> vpn l2tp server configure 

vpn-config[l2tp-config]> enable Y 

vpn-config[l2tp-config]> start_address 192.168.112.1 

vpn-config[l2tp-config]> end_address 192.168.112.25 

vpn-config[l2tp-config]> idle_timeout 10 

vpn-config[l2tp-config]> save

vpn l2tp server configure