Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch Reference Manual
Technical Specifications and Factory Default Settings
A-1
v5.0, January 2012
Appendix A
Technical Specifications and Factory Default
Settings
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in
below.
•
Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. Business Router Default Configuration Settings
Feature
Default Behavior
Router Login
User Login URL
http://www.routerlogin.net or http://www.routerlongin.com
User Name (case sensitive)
admin
Login Password (case sensitive)
password
Internet Connection
WAN MAC Address
Use Default address
WAN MTU Size
1500
Port Speed
AutoSense
Local Network (LAN)
Lan IP
192.168.1.1
Subnet Mask
255.255.255.0
RIP Direction
None
RIP Version
Disabled
RIP Authentication
None
DHCP Server
Enabled