Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch Reference Manual

Sample VPN Configurations with FVS318v3

C-19

This scenario assumes all ports are open on the FVS318v3 and FVL328.

Use this scenario illustration and configuration screens as a model to build your configuration. 

1. Log in to the FVS318v3 labeled Gateway A as in the illustration (

).

Log in at the default address of 

 with the default user name of admin and 

default password of password (or using whatever password and LAN address you have 
chosen).

2. Use the VPN Wizard to configure the FVS318v3 at Gateway A.

Follow the steps listed in 

 using the following parameters as 

•

Connection Name: Scenario_1 (in this example)

•

Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel 
endpoints

•

Remote WAN IP address: 22.23.24.25 (in this example), must be unique at each VPN 
tunnel endpoint

•

Remote LAN IP Subnet

–

IP Address: 172.23.9.1 (in this example), must be unique at each VPN tunnel endpoint

NETGEAR-Gateway A

Static IP address

NETGEAR-Gateway B

Static IP address

Note: Based on the network addresses used in this example, you would log in to the 

LAN IP address of 

 at Gateway A.

B

A