Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Reference Manual
Virtual Private Networking Using IPSec and L2TP Connections
262
NETGEAR ProSAFE VPN Firewall FVS318G v2
subnet mask, WINS server, and DNS address from the VPN firewall. The Mode Config
feature allocates an IP address from the configured IP address pool and activates a
temporary IPSec policy, using the information that is specified in the Traffic Tunnel Security
Level section of the Mode Config record.
feature allocates an IP address from the configured IP address pool and activates a
temporary IPSec policy, using the information that is specified in the Traffic Tunnel Security
Level section of the Mode Config record.
After configuring a Mode Config record, you must manually configure an IKE policy and
select the newly created Mode Config record from the Select Mode Config Record list. For
more information, see
select the newly created Mode Config record from the Select Mode Config Record list. For
more information, see
You do not need to change any VPN policy.
An IP address that is allocated to a VPN client is released only after the VPN client gracefully
disconnects or after the SA liftetime for the connection times out.
disconnects or after the SA liftetime for the connection times out.
Configure Mode Config Operation on the VPN Firewall
To configure Mode Config on the VPN firewall, first create a Mode Config record, and then
select the Mode Config record for an IKE policy.
select the Mode Config record for an IKE policy.
To configure Mode Config on the VPN firewall:
1.
Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
login time-out, you are automatically logged out.
2.
Select VPN > IPSec VPN > Mode Config.