Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Reference Manual

establishment time. If you require a VPN tunnel to remain connected, you can use the 
keep-alive and Dead Peer Detection (DPD) features to prevent the tunnel from being 
disconnected and to force a reconnection if the tunnel disconnects for any reason.

For DPD to function, the peer VPN device on the other end of the tunnel must also support 
DPD. Keep-alive, though less reliable than DPD, does not require any support from the peer 
device.

This section contains the following topics:

The keep-alive feature maintains the IPSec SA by sending periodic ping requests to a host 
across the tunnel and monitoring the replies.



Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.

The NETGEAR Configuration Manager Login screen displays. 

b.  In the Username field, enter admin and in the Password / Passcode field, enter 

password.

Use lowercase letters. If you changed the password, enter your personalized 
password. Leave the domain as it is (geardomain).

c.  Click the Login button.

The Router Status screen displays. After five minutes of inactivity, which is the default 
login time-out, you are automatically logged out.

Select VPN > IPSec VPN > VPN Policies. 

The VPN Policies screen displays the IPv4 settings.

Specify the IP version for which you want to edit a VPN policy:

IPv4. In the upper right of the screen, the IPv4 radio button is already selected by 
default. Go to 

.

IPv6. Select the IPv6 radio button.

The VPN Policies screen for IPv6 displays.