Netgear WAC104 – Dual Band 802.11ac Wireless Access Point User Manual

Enter the IP address that is assigned to the access point.
If you did not enable the DHCP client on the access point or did not assign a static IP address, enter

the default access point IP address 

192.168.0.100.

A login window opens.

Enter the access point user name and password.
The user name is 

admin. The default password is password. The user name and password are

case-sensitive.
The Home page displays.

Select

Advanced Setup > Advanced Wireless Settings.

The Advanced Wireless Settings page displays.

Scroll down to the bottom of the page and click the 

Set Up Access List button.

If you did not yet add any WiFi devices to the access list, the table does not show any.

Click the 

Add button.

The Available Wireless Client List shows the detected WiFi devices with their device name and MAC

addresses.

To add a device to the allowed list, either select the radio button of a WiFi device on the Available

Wireless Client List or, if the WiFi device does not show on the Available Wireless Client List, enter the

device name in the 

Device Name field and the MAC address in the MAC Address field.