Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch User Manual
Chapter 2. Configuring System Information
|
105
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
LLDP Interface Configuration
To display this page, click System
LLDP
LLDP
Interface Configuration. A screen similar
to the following displays.
1.
Use Port to specify the list of ports on which LLDP - 802.1AB can be configured.
2.
Link Status indicates whether the Link is up or down.
3.
Use Transmit to specify the LLDP - 802.1AB transmit mode for the selected interface.
4.
Use Receive to specify the LLDP - 802.1AB receive mode for the selected interface.
5.
Use Notify to specify the LLDP - 802.1AB notification mode for the selected interface.
6.
Use Transmit Management Information to specify whether management address is
transmitted in LLDP frames for the selected interface.
transmitted in LLDP frames for the selected interface.
7.
Optional TLV(s):
•
Use System Name to include system name TLV in LLDP frames.
•
Use System Description to include system description TLV in LLDP frames.
•
Use System Capabilities to include system capability TLV in LLDP frames.
•
Use Port Description to include port description TLV in LLDP frames.