Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch User Manual
462
|
Chapter 6. Managing Device Security
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Telnet
To display the Telnet page, click Security
Access > Telnet.
Telnet Authentication List
This page allows you to select the login and enable authentication list available. The login list
specifies the authentication method(s) you want used to validate switch or port access for the
users associated with the list. The enable list specifies the authentication method(s) you want
used to validate privileged EXEC access for the users associated with the list. These list can
be created by Authentication List page under Management Security.
specifies the authentication method(s) you want used to validate switch or port access for the
users associated with the list. The enable list specifies the authentication method(s) you want
used to validate privileged EXEC access for the users associated with the list. These list can
be created by Authentication List page under Management Security.
1.
Use Login Authentication List to specify which authentication list to use when you login
through telnet. The default value is networkList.
through telnet. The default value is networkList.
2.
Use Enable Authentication List to specify which authentication list you are using when
going into the privileged EXEC mode. The default value is enableList.
going into the privileged EXEC mode. The default value is enableList.