Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch User Manual
464
|
Chapter 6. Managing Device Security
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Console Port
To display the Console Port page, click Security
Access > Console Port.
1.
Use Serial Port Login Timeout (minutes) to specify how many minutes of inactivity
should occur on a serial port connection before the switch closes the connection. Enter
a number between 0 and 160: the factory default is 5. Entering 0 disables the time-out.
should occur on a serial port connection before the switch closes the connection. Enter
a number between 0 and 160: the factory default is 5. Entering 0 disables the time-out.
2.
Use Baud Rate (bps) to select the default baud rate for the serial port connection from the
pull-down menu. You may choose from 1200, 2400, 4800, 9600, 19200, 38400, 57600, and
115200 baud. The factory default is 9600 baud.
pull-down menu. You may choose from 1200, 2400, 4800, 9600, 19200, 38400, 57600, and
115200 baud. The factory default is 9600 baud.
3.
Use Login Authentication List to specify which authentication list to use when you login
through Telnet. The default value is defaultList.
through Telnet. The default value is defaultList.
4.
Use Enable Authentication List to specify which authentication list you are using when
going into the privileged EXEC mode. The default value is enableList.
going into the privileged EXEC mode. The default value is enableList.
Table
6-91.
Field
Description
Character Size (bits)
The number of bits in a character. This is always 8.
Flow Control
Whether hardware flow control is enabled or
disabled. It is always disabled.
disabled. It is always disabled.
Stop Bits
The number of stop bits per character. Its is always
1.
1.
Parity
The parity method used on the serial port. It is
always None.
always None.