Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch User Manual
Chapter 6. Managing Device Security
|
505
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Dynamic ARP Inspection
The Dynamic ARP Inspection (DAI) folder contains links to the following features:
DAI Configuration
To display the DAI Configuration page, click Security
Control> Dynamic ARP Inspection
DAI Configuration.
1.
Use Validate Source MAC to choose the DAI Source MAC Validation Mode for the
switch by selecting Enable or Disable radio button. If you select Enable, Sender MAC
validation for the ARP packets will be enabled. The factory default is disable.
switch by selecting Enable or Disable radio button. If you select Enable, Sender MAC
validation for the ARP packets will be enabled. The factory default is disable.
2.
Use Validate Destination MAC to choose the DAI Destination MAC Validation Mode for the
switch by selecting Enable or Disable radio button. If you select Enable, Destination MAC
validation for the ARP Response packets will be enabled. The factory default is disable.
switch by selecting Enable or Disable radio button. If you select Enable, Destination MAC
validation for the ARP Response packets will be enabled. The factory default is disable.
3.
Use Validate IP to choose the DAI IP Validation Mode for the switch by selecting Enable or
Disable radio button. If you select Enable, IP Address validation for the ARP packets will be
enabled. The factory default is disable.
Disable radio button. If you select Enable, IP Address validation for the ARP packets will be
enabled. The factory default is disable.