Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch User Manual
Chapter 2. Configuring System Information
|
85
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Stack Port Configuration
To display the Stack Port Configuration page, click System > Stacking > Advanced> Stack
Port Configuration. A screen similar to the following displays.
Port Configuration. A screen similar to the following displays.
1.
Configured Stack Mode - Specify the operating mode of the port to be either ethernet or
stacking. The default value is set to stacking.
stacking. The default value is set to stacking.
The following table describes Stack Port Configuration fields.
Table
2-31.
Field
Description
Unit ID
Displays the unit.
Port
Displays the stackable interfaces on the given unit.
Running Stack Mode
Displays the run-time mode of the stackable
interface.
interface.
Link Status
Displays the link status (UP/DOWN) of the port.
Link Speed (Gbps)
Displays the maximum speed of the stacking port.
Transmit Data Rate (Mbps)
Displays the approximate transmit rate on the
stacking port.
stacking port.
Total Transmit Errors
Displays the total number of errors in transmit
packets since boot. The counter may wrap.
packets since boot. The counter may wrap.
Receive Data Rate (Mbps)
Displays the approximate receive rate on the
stacking port.
stacking port.
Total Receive Errors
Displays the total number of errors in receive packets
since boot. The counter may wrap.
since boot. The counter may wrap.