Netgear FS752TP – 48 10/100 Mbps RJ45 ports and 2 gigabit combo (copper/SFP) ports and 2 gigabit RJ45 ports Software Guide

. This field displays the protocol version associated with the 

selected port. The only possible value is 1, corresponding to the first version of the 
802.1X specification. This field is not configurable.

. This field displays the port access entity (PAE) functionality of the 

selected port. Possible values are Authenticator or Supplicant. This field is not 
configurable.

. This field displays the current state of the authenticator 

PAE state machine. Possible values are as follows:

Initialize

Disconnected

Connecting

Authenticating

Authenticated

Aborting

Held

ForceAuthorized

ForceUnauthorized

. This field displays the current state of the backend authentication 

state machine. Possible values are as follows:

Request

Response

Success

Fail

Timeout

Initialize

Idle

. This field is used to enable or disable the EAPOL Flood mode 

per Interface.The default value is Enable.

Click Apply to send the updated screen to the switch and cause the changes to occur on 
the switch and the changes will be saved.

Click Initialize to begin the initialization sequence on the selected port(s). This button is only 

selectable if the control mode is auto. If the button is not selectable, it will be grayed out. 

When this button is clicked, the action is immediate. It is not required to click Apply for the 

action to occur.

Click Reauthenticate to begin the reauthentication sequence on the selected port. This 

button is only selectable if the control mode is auto. If the button is not selectable, it will be 

grayed out. When this button is pressed, the action is immediate. It is not required to click 
Apply

 for the action to occur.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 

the latest value of the switch.