Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 User Manual

A 1 in the mask indicates a do not care in the corresponding address bit.

When an access list rule includes a destination IP address and netmask (an extended 
access list), the destination IP address is compared to the network mask of the 
destination of the route. The destination netmask in the access list serves as a wildcard 
mask, indicating which bits in the route's destination mask are significant for the filtering 
operation. 

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

The following table describes the RIP Route Redistribution nonconfigurable data that is 
displayed.

Source Protocol 

The source route to be redistributed by RIP. The valid values are as 
follows:

Connected

Static

OSPF

Redistribute Mode

The route redistribution mode for a particular source protocol. By 
default this is disabled. 

Metric

The metric of redistributed routes for the given source route. The field 
displays 0 when the metric is not configured.

Distribute List

The access list that filters the routes to be redistributed by the 
destination protocol. The field displays 0 when not configured.

The following list of redistributed routes is valid when OSPF is selected as source. The list can include one 
or more of:

Match Internal

Sets internal OSPF routes to be redistributed.

Match External Type 1

Sets external type 1 OSPF routes to be redistributed.

Match External Type 2

Sets external type 2 OSPF routes to be redistributed.

Match NSSA External Type 1

Sets NSSA external type 1 OSPF routes to be redistributed.

Match NSSA External Type 2

Sets NSSA external type 2 OSPF routes to be redistributed.