Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 User Manual
Routing
328
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure Router Discovery
To configure router discovery:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> Router Discovery > Router Discovery Configuration.
6.
Use one of the following methods to select an interface:
•
In the Go To Interface field, enter the interface in the unit/slot/port format and click on
the Go button.
the Go button.
•
Next to the Interface column, select the check box for the interface that you want to
configure.
configure.
7.
Use Advertise Mode to select Enable or Disable.
If you select Enable, router advertisements are transmitted from the selected interface.
8.
Use Advertise Address to select Enable or Disable.
If you select Enable, router advertisements are transmitted from the selected interface.
9.
Use Maximum Advertise Interval to enter the maximum time (in seconds) allowed
between router advertisements sent from the interface.
10.
Use Minimum Advertise Interval to enter the minimum time (in seconds) allowed between
router advertisements sent from the interface.
The value must be in the range of 3 to 1800. The default value is 450.000000.
11.
Use Advertise Lifetime to enter the value (in seconds) to be used as the lifetime field in
router advertisements sent from the interface.