Netgear RN10200 – ReadyNAS 100 Series 2- Bay (Diskless) Software Guide
For information about initializing and formatting LUNs, see
on page 97.
Initialize and Format LUNs
After you set up initiator access to the LUN group, you must initialize and format each LUN in the LUN group.
For more information about setting up initiator access, see
on page 92.
The following procedure uses the Microsoft iSCSI Software Initiator, which is freely available online and is
integrated in Windows 7.
integrated in Windows 7.
If you use an operating system other than Windows, the steps are different, but the
basic tasks remain the same.
basic tasks remain the same.
Note
To initialize and format LUNs in the LUN group:
1.
Open the Windows Disk Management application.
Each LUN in the LUN group displays as an unallocated disk that must be initialized and formatted.
Each LUN in the LUN group displays as an unallocated disk that must be initialized and formatted.
If the disks do not display, select Action > Refresh in the Disk Management window.
Tip
2.
Initialize unallocated disks:
a.
Select an unallocated disk by clicking it.
b.
In the Disk Management window, select Action > All Tasks > Initialize Disk.
c.
Select the check box next to each unallocated disk that you want to initialize.
LUNs
97
ReadyNAS OS 6.6