Netgear EVA9150 – Digital Entertainer Elite User Guide

2-6

Programming the NETGEAR Universal Remote

To program the device buttons to control a home entertainment device:  

1. Locate the codes for the devices you want to program in 

For future reference, write down each device code in the following table: 

2. Turn on the home entertainment device.

3. Press a device button on your NETGEAR Universal Remote. You can use any device button 

for any type of device. NEATGEAR recommends that you use the device buttons for the 
following:

•

 

TV. Program a TV or mobile LCD device. 

•

 

DVD. Program a DVD player, TV/DVD combo, TV/VCR/DVD combo, portable 

DVD player, or mobile DVD player.

•

 

AUX. Program other types of devices or an additional DVD or TV.

4. Press and hold 

 

SET until the red LED blinks twice. 

5. Enter the first five-digit code listed in 

The LED blinks once as each digit is entered. If the code is correct, the LED blinks twice when 
the programming is complete.

6. Aim the NETGEAR Universal Remote at the device, and press Power. The device should turn 

off. If it does not, repeat these instructions, trying each code for your brand until you find a 
code that works. If you cannot find a code that works, see 

.

7. Repeat steps these instructions for any additional devices you want to control. 

TV Code

DVD Code

AUX Code

Note: If the LED does not blink twice, repeat these instructions to enter the code 

again.