Netgear EVA9150 – Digital Entertainer Elite User Guide

Programming the NETGEAR Universal Remote

2-7

If your device does not respond to the remote after trying all codes listed for your brand, or if your 
brand is not listed, try searching for your code: 

1. Press a device button once. 

2. Press and hold 

 

 

until the red LED blinks twice. 

3. Enter 9 9 1, then the device group number (see the following table). The LED blinks twice.  

4. Aim the remote at the device, and press Power. The remote sends codes from its library to the 

selected device, starting with the most popular code first. If the device responds, go to step 7.

5. If the device does not respond, press CH+. The remote will try the next code. Continue until 

the device responds. 

6. To search for other device codes, repeat step 1 to step 5. 

7. Press 

 

SET. This will save the latest code sampled. 

If you set up the NETGEAR Universal Remote using the procedure in 

, you can discover the four-digit code used to operate your equipment. 

For example, to find out the code assigned to your TV: 

1. Press 

 

TV once. 

2. Press and hold 

 

 

until the red LED blinks twice. 

0

Cable (cable converters, video accessories, satellite 
receivers)

1

TV (TVs) 

2

VCR (VCRs, DVD players) 

3

Audio (audio amplifiers, audio tuners, CD players)

Tip: Press CH- to try the previous code.