Netgear D6400 – AC1600 WiFi VDSL/ADSL Modem Router—802.11ac Dual Band Gigabit User Manual

Enter the VDSL settings as described in the following table.

Multiplexing Method

These settings are disabled because they do not apply to a VDSL 
connection.

VPI

VCI

Use VLANID

Select the Use VLANID check box and enter the VLAN ID, as indicated by 
your ISP. 

A VLAN ID might be required if you subscribe to both Internet service and 

IPTV service. In some unusual situations, a VLAN ID is required for VDSL 
Internet service. If your ISP did not provide you with a VLAN ID, leave the 
Use VLANID check box cleared, which is the default setting.
For information about setting up VLAN tag groups, see 

196.

Priority (802.1p)

If your ISP provided you with a VLAN ID and a priority value, enter the 
priority value, which is a number from 0 to7. 
You can enter a priority value only in combination with a VLAN ID. If your 
ISP did not provide you with a priority value, leave the default setting (0).

Bridge Mode (bind LAN4 to 
WAN2) 

This setting is an option that applies to the IPTV interface only. To bind LAN 
port 4 to the IPTV interface (that is, the WAN2 virtual interface), select the 
Bridge Mode (bind LAN4 to WAN2) check box.
For more information, see 

Encapsulation

For a PPP over Ethernet (PPPoE) connection, select PPPoE from the 
menu. 

PPP over ATM (PPPoA) is not supported for a VDSL connection.

Login

Enter the login name that you use to log in to your Internet service, as 
indicated by your ISP.
This login name is often an email address.

Password

Enter the password that you use to log in to your Internet service, as 
indicated by your ISP.

Service Name (If Required)

Enter the service name that you use to log in to your Internet service, as 
indicated by your ISP.
Often, a service name is not required.

Connection Mode

Select how the Internet connection functions:

Always On. Once the Internet connection is established, it remains on. 
This is the default setting.

Dial on Demand. When someone attempts to connect to the Internet, 
the Internet connection is established. When the idle time-out period 
expires, the Internet connection is terminated.

Manually Connect. You must connect to the Internet manually (see 

230 or