KitchenAid 24-Inch 6-Cycle/7-Option Dishwasher, Pocket Handle Installation Guide

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the recommended tools and parts before starting
installation. Read and follow the instructions provided with any
tools listed here.

All Installations

Tools needed:

*Must be the proper size to connect your household wiring to

16-gauge wiring in dishwasher.

Other useful items you may need:

Parts supplied:

Parts needed:

(4) #10 x ¹/

₂" wood screws (if installing custom front panels)

Supplied in Kit:

(4) Plastic studs (attached to each other by runners)
(4) Short screws (10-16 hex-head screw)
(4) Long screws (8-18 Torx

head screws)

(1) Template (located inside Use and Care Guide bag assembly)
(1) Instruction sheet (located inside Use and Care Guide bag
assembly)
NOTE: The screws supplied are used for only

³⁄₄" thick wooden

panel. If the wooden panel is less than

³⁄₄" thick, customer must

purchase screws locally.
Other parts you may also need:

NOTES:

■

Moisture barrier tape is recommended when installing a
dishwasher under a wood countertop.

■

Parts available for purchase in plumbing supply stores. Check
local codes. Check existing electrical supply. See “Electrical
Requirements” section. It is recommended that electrical
connections be made by a licensed electrical installer.

In addition, for first-time installations

Tools needed:

Parts needed:

Make sure all these parts are included in the literature package.
If parts are not included, call 1-800-422-1230.

†®TORX, T15, and T20 are registered trademarks of Saturn Fasteners, Inc.