KitchenAid 24-Inch 6-Cycle/7-Option Dishwasher, Pocket Handle Installation Guide

Page of 56
4
Location Requirements
Grounded electrical supply required.
Do not run drain lines, water lines or electrical wiring where they 
can interfere with or contact dishwasher motor or legs.
The location where the dishwasher will be installed must provide 
clearance between motor and flooring. Motor should not touch 
the floor.
Do not install dishwasher over carpeted flooring.
Shelter dishwasher and water lines leading to dishwasher against 
freezing. Damage from freezing is not covered by the warranty.
A moisture barrier accessory (Part Number 4396277) is available 
from your dealer for installing underneath the countertop.
Call 1-800-422-1230 to order.
Check location where dishwasher will be installed. The location 
must provide:
easy access to water, electricity and drain.
convenient access for loading and unloading dishes. 
Corner locations require a 2" (5.1 cm) minimum clearance 
between the side of the dishwasher door and the wall or 
cabinet.
square opening for proper operation and appearance.
cabinet front perpendicular to floor.
level floor. If floor at front of opening is not level with floor 
at rear of opening, shims may be needed to level 
dishwasher.
Helpful Tip: Be sure to accurately measure dimensions and 
ensure dishwasher is level if the floor in the dishwasher opening is 
uneven (example: Flooring extends only partway into opening).
NOTE: To avoid shifting during dishwasher operation, shims must 
be securely attached to the floor.
If dishwasher will be left unused for a period of time or in a 
location where it may be subject to freezing, have it winterized by 
authorized service personnel.
Make sure pipes, wires and drain hose are within the shaded area 
shown in the “Product and Cabinet Opening Dimensions” section.