KitchenAid 24-Inch 6-Cycle/7-Option Dishwasher, Pocket Handle Use & Care Manual

After removing the culinary tool rack, you can raise or lower the top 
rack to fit tall items in either the top or bottom rack. Adjusters are 
located on each side of the top rack. Each adjuster has 2 preset 
positions. 

To raise the rack,

press both rack adjusters and lift the rack until it 

is in the up position and level.

To lower the rack, 
press both rack 
adjusters and 
slide the rack to 
its down position 
and level.

®

The removable top rack allows you to wash larger items such as 
pots, roasters, and cookie sheets in the bottom rack.

IMPORTANT: Remove dishes prior to removing the top rack from 
dishwasher.

To gain access to the track stops, pull the upper rack forward 
about halfway out of the tub.

To open, flip the track stop toward the outside of the tub. 

After opening both track stops, pull top rack out of the rails.

®

The removable top rack 
allows you to wash 
larger items such as 
pots, roasters, and 
cookie sheets in the 
bottom rack.

IMPORTANT: Remove 
dishes prior to removing 
the top rack from the 
dishwasher.

To gain access to the 
removable tabs on the 
tracks/rails, pull the 
upper rack forward about halfway out of the tub.

On one side, press the tab on the track in and pull up the front end 
of the rack out of the track. Then repeat this step on the other side 
to completely remove the front end of the rack.   

Then remove the back end of the rack, by pulling the back end out 
with a slightly forward, and then upward motion.

Pull the tracks forward about halfway out of the tub.

Along the sides of the racks are round attachment tabs. Align the 
rack's back end attachment tabs with the cutout in the track. Push 
down into place.

Pull the tracks completely out, and align the rack's front end 
attachment tabs with the cutout in the track. Push down into place. 
You will hear a snap when the front end of the rack is secured into 
place on each side. 

The removable culinary tool rack 
(3rd level rack) allows you to wash 
larger items in the upper rack, or 
remove both the culinary tool rack 
and top rack to wash larger times 
in the lower rack. See “Removable 
Top Rack” section.

To remove the rack:
1. To access track stops, pull the 

rack forward until it stops and 
clicks into place.

2. To open track stops, flip the track stop to the outside of 

the track.

3. After opening both track stops, slide front wheels up and 

out of the slot in track. Continue to pull rack forward in track 
and slide the back wheels up and out of the track.

4. Close track stops.

5. Slide rack tracks back into dishwasher.

To replace the rack:
1. Gently pull rack tracks forward in dishwasher until they 

stop and click into place.

2. To open track stops, flip the track stop to the outside of 

the track.

3. Place the back rack rollers on each side of the rack into 

the track slot and roll the rack back into the tracks.

4. Insert front rack rollers on each side of the rack into the 

rack slots.

5. Close track stops on both sides of rack and slide rack 

back into dishwasher.

A

B