Xerox XEScan Solution User Guide
28
First Settings
Selecting a Color Mode
Please select if you want to perform a color copy, a grayscale copy or a black & white (monochrome) copy.
Nota bene: depending on your scanner features and software license some modi may not be available.
Scanner / DPI
Check the scanner is operational. The button depicted as a LED is a control field for the scanner. The color of the
LED on the button shows the state of operation the scanner is in:
•
operational
•
error
•
warming up
•
device not found
If the scanner LED is not green, move your mouse over the scanner name to obtain the error message.
Scan Mode
Autostart
Autostart is intended to ease document scanning. If you activate this function, scanning will start when documents
are inserted in the scanner.
Batch
If you scan similar documents it may not be necessary to do a preview for each document in order to set the
parameters for the automatic mode. So you may click the button to be in batch mode. In this mode a preview is
only done for the first document, the parameters being used for all following documents to speed up the scanning
of a batch of similar documents.
When the button is pressed and the first scan has been done the user will no longer be able to change either the
settings for document size or document type or the scan mode (bw/grey/color). (The user can leave the batch by
releasing the button or by changing to a different program mode (RIP/STF/STP/STEmail).
Mirroring
Select Mirroring if you want to mirror the image.