Xerox 2101 ST Digital Copier/Printer Installation Guide
6
Quick Start Guide
Preparing to print
To set up the Fiery EX2101 for printing, you must perform the following tasks:
• Connect the Fiery EX2101 physically to a functioning network.
• Configure the network server.
• Set up the Fiery EX2101 from the Control Panel.
• Prepare client workstations for printing.
A brief explanation of each task follows.
Connecting the Fiery EX2101 to a functioning network
N
OTE
:
When you add the Fiery EX2101 to a network, it is assumed that a network
administrator has already installed a network cabling system and connected the
workstations and servers. For examples of different networks, see the
workstations and servers. For examples of different networks, see the
Configuration
Guide
.
T
O
CONNECT
THE
F
IERY
EX2101
TO
A
NETWORK
1.
Prepare a network node for the Fiery EX2101.
2.
Route the cable to a location near the copier where the Fiery EX2101 will be installed,
and attach the cable to the network interface of the Fiery EX2101.
and attach the cable to the network interface of the Fiery EX2101.
For more information, see Chapter 1 of the
Configuration Guide
.
3.
Connect the Fiery EX2101 to the copier and print a Test Page.
For detailed instructions, see the
Configuration Guide
.
T
O
PREPARE
FOR
F
IERY
EX2101
CONFIGURATION
1.
Print a copier Test Page to verify the copier is functioning normally.
2.
Turn off the copier and connect the interface cable from the copier to the
Fiery EX2101.
Fiery EX2101.