Xerox Xerox 8830 Digital Solution with AccXES Controller serial number CNG Leaflet

14.  Verify that the Optional License(s) is/are present.

a.  Print a Printer Configuration Test Print (Minimal) (Figure 3) or

on the WebPMT click PRINTER DEFAULTS, UTILITIES,
Configuration to open the Configuration screen (Figure 4)

b.  Verify that the feature is enabled:

TEST PRINT (See Figure 3.)

•

 

Color license is located under the SCANNER
CONFIGURATION.

•

 

Check under the second column of the CONTROLLER
CONFIGURATION for OPTIONAL LICENSES. “Present”
should appear opposite the feature license that was
installed.

WebPMT  (See Figure 4)
Select PRINTER DEFAULTS > UTILITIES > Configuration.
“Present” should appear opposite the feature license that was
installed.

15.  Place the Test Print, along with a record of your Coupon ID, in

the service logbook located in the door panel of your printer.

16.  Store the feature key diskette in a safe place, together with

your other drivers and software diskettes and CD’s.

17.  Refer to the section entitled “Enabling a Feature Key (Optional

Feature),” at the end of this document, to enable the feature to
be used.

1.  In the United States only, call Customer First at 1 877-XES-

DNCS. If you are outside the United States, please contact
your support representative for feature key instructions.

2.  When you receive a diskette or e-mail containing the

appropriate file, follow the  “Key Redemption With Internet
Access” procedure to enable the purchased feature.