Xerox Xerox 8830 Digital Solution with AccXES Controller serial number CNG Leaflet

XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction

68

Hardware Specifications

CPU:  Power PC 8240 (603e) operating at 250 MHz clock speed.

RAM:  64MB DRAM is standard.  Maximum RAM is 256MB.  Two DIMM Slots accommodate 64 or 128MB, PC100, DIMMs.

Hard disk:  Ultra SCSI, 7200 rpm internal hard disk drive.

Physical Characteristics

The Controller is attached to the side panel of the 8825 Printer as an embedded device.

Electrical Requirements

100 - 250 VAC auto-ranging power supply

Agency Approvals

Safety: UL 1950, CA22.2 No. 950 (CUL), EN 60950 (CE Mark)

EMC:

CE Mark, FCC Class A, Canada Radio Interference Regulations Class A, VCCI Class 1

Serial

Two 9 pin Host serial ports provided.  One is used by the 8825 Digital Solution scanner when this option is connected.  The second is
used as an input port for receiving data via serial port connection.

Parallel

(IEEE 1284 Compliant) High density port connector provided.

SCSI

Optional 50 pin SCSI-2 card available.

VPI

Optional card available.

TCP/IP

10/100 Ethernet Network Interface Port provided:  RJ-45 connection, supporting TCP/IP only.

Network

Optional External Ethernet Adapter available to support TCP/IP, Novell 3.x, 4.x, 5.x, and NetBEUI.

IEEE 1394

Interface supporting the Synergix Scan System