Xerox Paris, a document system Support & Software User Guide
Chapter 1
The PARIS Spooler32 Technical Manual
32
Physical Page Shift
Physical Page Shift allows the print image to be shifted either or both
horizontally and vertically on the page. This allows the image position of
different printers to be adjusted to match, or pre-printed material can be aligned
exactly.
horizontally and vertically on the page. This allows the image position of
different printers to be adjusted to match, or pre-printed material can be aligned
exactly.
The specified unit of measure is 300 dots per inch (dpi) so a measure of 1
equals 1/300th inch, or 300 equals 1 inch.
equals 1/300th inch, or 300 equals 1 inch.
Movement is controlled using positive and negative measure around the X
(Horizontal) and Y (Vertical) axis. Up and left directions are plus (+) and down
and right directions are minus (-).
(Horizontal) and Y (Vertical) axis. Up and left directions are plus (+) and down
and right directions are minus (-).
For example, if H = -75 (-¼”) and Y = -150 (-½”), the print image will be
shifted ¼” to the right and ½” down.
shifted ¼” to the right and ½” down.
To shift the image, enter the required number of units (dots) in the Horizontal
and/or Vertical boxes as required.
and/or Vertical boxes as required.
Y
X
+
=
Up
Left
-
=
Down Right
For example:
X (Horizontal) = -75
Y (Vertical)
X (Horizontal) = -75
Y (Vertical)
= -150
Shift the page to the right
for a quarter of an inch
and down for half an inch
and down for half an inch
¼”
½”