Xerox Novell Distributed Print Services (NDPS) Support & Software User Guide
Installing Your Xerox Printer
XEROX NDPS/NEPS SOLUTION USER GUIDE
❖ 11
The Final steps listed below will define how to
install the Xerox NDPS solution on your server
from any of the listed resources
install the Xerox NDPS solution on your server
from any of the listed resources
1. Go to the server console screen.
2. At the server console, type: nwconfig for a NetWare
5.x server OR load install for a NetWare 4.x server and
press [ENTER]
press [ENTER]
3. Select Product Options and press [ENTER]
4. Select Install a product not listed and press [ENTER]
• You will see a screen for selecting a source path.
5. Press the [F3] key to type in source path, then press
[ENTER]. Press [ENTER] to continue. This will initiate
a file copy. The file copying will take a few minutes.
a file copy. The file copying will take a few minutes.
If the server OS version is newer than Netware 5.1
Service Pack 3 additional steps are required to
complete the installation. Otherwise the installation
is complete.
Service Pack 3 additional steps are required to
complete the installation. Otherwise the installation
is complete.
NOTE:
The NDPS Broker must be running to proceed. If it is
not running you will get errors and must re-start the install.
6. The install script will prompt that a program
XPRNDRV.NLM will install the print drivers. Press
[ENTER]. This will start the program and switch to a
new screen. DO NOT return to the NWCONFIG until
the XPRNDRV.NLM instructs you to do so.
[ENTER]. This will start the program and switch to a
new screen. DO NOT return to the NWCONFIG until
the XPRNDRV.NLM instructs you to do so.
7. At the prompt enter a fully qualified name for an
“Admin” user. Then press [ENTER].