Xerox Document Workstation with PlotWorks Support & Software User Guide
Chapter 9-50 • PlotWorks User Guide
Fig 9.18
The
Scanners
User
Interface
screen
Also ensure that the back LED display shows a 'P' with a dot after it. The 'P'
indicates that the scanner is initialized. The dot appears once connection is
established with the FireWire card.
indicates that the scanner is initialized. The dot appears once connection is
established with the FireWire card.
Configure TWAIN Scanning Options
Select the TWAIN Source
Before you can use the Synergix Scanner you need to select it as a TWAIN source.
1.
Open the Job Editor if it is not already open.
2.
Click on the File menu.
3.
Select Twain from the File menu. The Twain sub menu opens.
4.
Click on Select Source. The Select Source dialog box displays.
5.
Click on Synergix Scanner 1.0 if it is not already selected.
6.
Click on the Select button. The Select Source dialog box disappears.
The Job Editor now knows that the Synergix Scanner is the device to use for
scanning.
scanning.
Select TWAIN scanning options
To do so:
1.
Click on the Job Editor Setup menu.
2.
Select Twain Options. The Twain Scanning Options dialog box appears.
This dialog box is used to select file-naming options for scanned images, and
set other TWAIN scanning options.
This dialog box is used to select file-naming options for scanned images, and
set other TWAIN scanning options.
3.
Enter values for options provided in this dialog box. For more information on
options provided refer to "Twain Scanning Options" on page 4-88.
options provided refer to "Twain Scanning Options" on page 4-88.
4.
When you have completed setting your options, click on the OK button.
If at a later date you want to change any TWAIN scanning option, it is necessary
to first close the Synergix Scan System dialog box before opening the TWAIN
Scanning Options dialog box to make your changes. Then close the TWAIN
Scanning Options dialog box, and reopen the Synergix Scan System dialog box.
Otherwise your changes will be ignored.
to first close the Synergix Scan System dialog box before opening the TWAIN
Scanning Options dialog box to make your changes. Then close the TWAIN
Scanning Options dialog box, and reopen the Synergix Scan System dialog box.
Otherwise your changes will be ignored.