Xerox Document Workstation with PlotWorks Support & Software User Guide
E-14 • PlotWorks User Guide
6.
Right-click on the Dial-Up Monitor icon (located near the clock on the
Windows NT task bar) and select Hang Up, click on the name of the
connection that is running, then click Yes.
Windows NT task bar) and select Hang Up, click on the name of the
connection that is running, then click Yes.
The connection is ready to transfer .PLP files. For more information on using the
Job Editor to send job files, see “Output Job Tickets” on page G-28, or refer to the
PlotWorks Client guide.
Job Editor to send job files, see “Output Job Tickets” on page G-28, or refer to the
PlotWorks Client guide.
RAS Installation
To install Remote Access Service on your Windows NT workstation:
1.
Click the Windows Start button, click Settings, click Control Panel, and
double-click Network to display the Network dialog box.
double-click Network to display the Network dialog box.
2.
Click the Services tab and click Add. A list of available services displays.
3.
Click Remote Access Service.
4.
Click OK and follow the prompts.
5.
When prompted, select the modem to be used as a RAS Device, then click
OK. The Remote Access Setup dialog box displays:
OK. The Remote Access Setup dialog box displays:
Fig. E.11
Remote
Access
Setup
dialog box
6.
Click the Configure button. The Configure Port Usage dialog box displays:
Fig. E.12
Configure
Port
Usage
dialog box
7.
Select Dial out only and click OK.