Xerox Document Workstation with PlotWorks Support & Software User Guide
E-22 • PlotWorks User Guide
If NBTSTAT fails, check to see if the LMHOSTS file has an extension (like .TXT).
If so, rename the file (from LMHOSTS.TXT to LMHOSTS, for example) and try
again.
If so, rename the file (from LMHOSTS.TXT to LMHOSTS, for example) and try
again.
Install NWLink IPX/SPX Compatible Transport
If you are currently on a Local Area Network (LAN), contact your Network
Administrator before proceeding. Administrative Privileges are required to install
a network protocol on an NT server or workstation.
Administrator before proceeding. Administrative Privileges are required to install
a network protocol on an NT server or workstation.
1.
Open the Network dialog box from the Windows Control Panel.
2.
Select the Protocols tab and click Add.
3.
Select NWLink IPX/SPX Compatible Transport from the Network
Protocols list box and click OK. A Windows NT Setup dialog box appears,
prompting for the location of Windows NT setup files.
Protocols list box and click OK. A Windows NT Setup dialog box appears,
prompting for the location of Windows NT setup files.
4.
Enter the path to the location of the Setup files on the Windows NT Server
4.0 CD-ROM, if necessary.
4.0 CD-ROM, if necessary.
The Setup files are typically located at x:\i386, where ‘x’ is the letter of the CD-
ROM drive.
ROM drive.
5.
Click OK. NWLink IPX/SPX Compatible Transport and NWLink NetBIOS
appear in the Network Protocols list box.
appear in the Network Protocols list box.
6.
To complete NWLink IPX/SPX Compatible Transport installation, do one of
the following:
the following:
1.
Accept the default configuration:
•
Click Close. The Bindings process starts and finishes, and the
Network Settings Change dialog box appears.
CAUTION: Make sure to save all work and close all applications before
proceeding to prevent data loss.
proceeding to prevent data loss.
•
Click Yes to restart the computer and enable the new settings.
2.
Manually configure NWLink IPX/SPX Compatible Transport: