Xerox Document Workstation with PlotWorks Support & Software User Guide
E-24 • PlotWorks User Guide
4.
Click Close. The Bindings process starts and finishes, and the Network
Settings Change dialog box displays.
Settings Change dialog box displays.
CAUTION: To prevent data loss, save all open files, and exit applications before
proceeding.
proceeding.
5.
Click Yes to restart the computer and enable the new settings.
Installing the MS Loopback Adapter
The Microsoft Loopback Adapter is usually installed when you install certain
network protocols. However, should you need to install it separately, this section
details the installation.
network protocols. However, should you need to install it separately, this section
details the installation.
1.
Open the Network dialog box from the Windows Control Panel.
2.
Select the Adapters tab and click Add.
3.
Click MS Loopback Adapter and click OK
4.
Select Frame Type as 802.3, click OK and follow the instructions on the
screen.
screen.
5.
If you are using TCP/IP, you might prompted to enter the TCP/IP Properties
for the MS Loopback Adapter. For example:
for the MS Loopback Adapter. For example:
•
Select the MS Loopback Adapter.
•
Click Specify an IP address.
•
For the IP Address type 192.168.1.253.
•
For the Subnet Mask type 255.255.255.0.
•
Click OK.
6.
Click Close and follow the instructions on the screen.
Installing Network Protocols (Win95)
This section provides the basic steps required to install a network protocol on a
Windows 95 workstation.
Windows 95 workstation.
Installing TCP/IP
If you are currently on a Local Area Network (LAN), contact your Network
Administrator before proceeding.
Administrator before proceeding.
1.
Open the Control Panel and double-click Network. The Network dialog box