Xerox 4215 MICR MRP Installation Guide
C.
Reconfiguring BIN IDs
This appendix describes reconfiguring the BIN IDs.
To change the BIN ID for the IPDS interface you must specify the
following information:
following information:
•
BIN ID
•
PCL tray selection
•
Paper size.
The example in figure C–1 shows specifying BIN ID 0 to select
the PCL tray selection command 1. It also defines legal paper
size and duplex printing.
the PCL tray selection command 1. It also defines legal paper
size and duplex printing.
Figure C–1.
Changing the BIN ID
TRAY
1
Upper tray
PRESENT
YES
ID
0
PRINTERID
1
PAPERSIZE
LEGAL
DUPLEX
YES
ENDTRAY
After specifying the BIN and paper size with the TRAY and
ENDTRAY MakeITDS commands, the paper sizes must also be
defined if they differ from the sizes shown in the following
figures. Since the IPDS interface will convert the datastream to
PCL5, you must define the PCL papersize for each of the
different paper sizes you intend to use.
ENDTRAY MakeITDS commands, the paper sizes must also be
defined if they differ from the sizes shown in the following
figures. Since the IPDS interface will convert the datastream to
PCL5, you must define the PCL papersize for each of the
different paper sizes you intend to use.
Figure C–2 provides the specifications in points for lettersize
paper.
paper.
Figure C–2.
Letter paper
PAPER
LETTER
PRINTAREAX
50
PRINTAREAY
50
PRINTAREAWIDTH
2450
PRINTAREAHEIGHT
3200
LOGICALPAGEX
75
LOGICALPAGEY
0
LOGICALPAGEWIDTH
2400
LOGICALPAGEHEIGHT
3300
ENDPAPER
XEROX MRP FAMILY INTELLIGENT PRINTER DATA STREAM (IPDS)
C-1
CONFIGURATION AND REFERENCE GUIDE