Xerox 4215 MICR MRP User Guide

This chapter describes selecting a printer, and the required
parameters for printing a document. 

You must select the Xerox printer icon in the Chooser panel
before you send a document to the printer for the first time.
Follow these steps to select the Xerox printer:

1. Select the Chooser from the Apple menu.

2. Click on the Xerox printer icon in the Chooser panel.

N

Note:  You may have to scroll down to see this icon, since
printer icons are listed alphabetically in the Chooser.

3. If you see a list of AppleTalk zones, click on the zone where

the Xerox printer is located.

4. Select the appropriate printer by clicking on its name. 

5. If you see a message stating that AppleTalk is required, click

[OK], then click the [Active] button in the Chooser.  

This ensures that AppleTalk is active, so that the driver can
identify the printer.

6. Close the Chooser by clicking the small box in the upper left

corner of the window.

The factory default is the name of the printer, for example,
“Xerox MRP.”  You should rename your printer to avoid having
printers with the same name on the AppleTalk network.  You can
use Macintosh utilities to rename a printer, for example, The
Namer or the LaserWriter Utility. 

Once the Xerox Driver Builder (Xerox driver) is built, you can
open a document in an application and select the Xerox page
setup and print options.  You can also select these features from
the Finder by choosing Print Window, Print Desktop, or Print.
Refer to the Macintosh User’s Guide for detailed instructions on
printing.

XEROX MRP FAMILY APPLETALK INTERFACE OPERATOR GUIDE

2-1