Xerox WorkCentre 4265 Administrator's Guide
Administrator Tools
Xerox
®
WorkCentre
®
4265 Multifunction Printer 143
System Administrator Guide
Energy Saving Settings
Setting the Power Saver Mode Timers in CentreWare Internet Services
1.
In CentreWare Internet Services, click Properties > General Setup.
2.
Click Power Management.
3.
For each timer, specify the time that the printer waits before it enters each power saver mode.
4.
Click Apply.
Setting the Power Saver Mode Timers at the Control Panel
The printer exits Energy Saver mode when it receives a print job, or when you press the Power Saver
button. The sum of the two timers cannot exceed 120 minutes.
1.
1.
At the printer control panel, press the Machine Status button, then touch the Tools tab.
2.
Touch Device Settings > General> Power Saver Timer.
3.
To select the desired time, press the arrow buttons, or enter a value using the numeric keypad.
−
Specify how long the printer remains idle before it goes from ready mode to low-power mode.
−
Specify how long the printer remains idle before automatically going from low-power mode to
sleep mode.
4.
To turn off the automatic transition, clear the Enable Energy Saver check box.
5.
Touch OK.