Xerox WorkCentre 5022/5024 User Guide
Tools
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
9-35
Line Volume
Sets the external phone's number of rings when Mode is set to Tel/Fax.
You can set a value between 1 and 15 rings (in increments of 1).
The time is set to 2 times at the time of factory shipment.
The default value varies by region. The default value is set when Region is set.
Line Type
Sets the line type to use.
PSTN is set at the time of factory shipment.
PSTN
Set for fax transmissions on a standard phone line.
PBX
Set for fax transmissions on an internal private branch exchange within a corporation, or on a public
line.
line.
Dial Type
Sets the dial type.
You can select PB, DP (10 PPS), or DP (20 PPS).
Note
The default value varies by region. The default value is set when Region is set.
Call Interval
Sets the amount of time the machine waits between the end of transmission and the start of the next.
You can set a value between 3 and 255 seconds (in 1 second increments).
Setting a high Call Interval value increases the total time needed for "broadcast" faxes (sent to multiple
recipients at once), but the machine can receive faxes during the waiting periods.
recipients at once), but the machine can receive faxes during the waiting periods.
Note
The default value varies by region. The default value is set when Region is set.
Redial Attempts
Sets the number of times the automatic redial operation is performed when the recipient is busy or
does not answer.
does not answer.
Note
The default value varies by region. The default value is set when Region is set.