Xerox WorkCentre 5022/5024 User Guide
Appendix
Xerox
®
WorkCentre
®
5022/5024 Multifunction Printer
User Guide
14-14
•
A 2-sided print job is printed on one side.
•
A job was terminated (if data cannot be written to the print page buffer, the job including that
page, is terminated).
page, is terminated).
Meter Counts for 2 Sided Printing
When printing a 2 sided print job, depending on the application being used, blank sheets can be
inserted automatically to adjust pages. These blank sheets inserted by the application also are counted
by the meter.
inserted automatically to adjust pages. These blank sheets inserted by the application also are counted
by the meter.
Automatic Cancellation of Print Jobs
A job is canceled if a malfunction occurred in the machine or the selected tray that is not installed.
2-Sided Printing
When performing 2-sided printing on a machine on which the duplex output unit is not installed,
printing only occurs on one side. In this case, print orientation may not be as expected.
printing only occurs on one side. In this case, print orientation may not be as expected.
Memory Full Errors
•
•
A File System Full or similar error will appear during attempts to send print data at volumes
exceeding 30 MB per job using the LPD protocol and printing will be disabled. If this occurs,
change the protocol in the Port Settings of the printer driver to Port9100 (RAW DATA Socket), or
break the job into different sections before printing.
exceeding 30 MB per job using the LPD protocol and printing will be disabled. If this occurs,
change the protocol in the Port Settings of the printer driver to Port9100 (RAW DATA Socket), or
break the job into different sections before printing.
•
If the machine stops due to an error caused by the machine running out of paper, the cover on the
machine being open, or some other issue, the last job will be canceled while in progress if an
attempt is made to send continuous print job data exceeding 30 MB total, even with local printing
via USB or printing using the Port9100 protocol. (Jobs for files that are stored during printing will
resume printing once the error has been resolved and removed.) To restart printing for the last job
that was canceled, first remove the write error message displayed on the client computer side
before attempting to execute the print job again.
machine being open, or some other issue, the last job will be canceled while in progress if an
attempt is made to send continuous print job data exceeding 30 MB total, even with local printing
via USB or printing using the Port9100 protocol. (Jobs for files that are stored during printing will
resume printing once the error has been resolved and removed.) To restart printing for the last job
that was canceled, first remove the write error message displayed on the client computer side
before attempting to execute the print job again.
Notes and Restrictions on the Use of the Scan Feature
This section describes notes and restrictions to observe when using the Scan feature.
For the notes and restrictions on the scan driver, see the "Readme" information on the CD-ROM for the
Driver CD Kit that came with the machine.
Driver CD Kit that came with the machine.
Restriction on Scanning Capacity
The maximum scanning capacity for one page is 297 × 432 mm. For standard sizes, A3 or 11 × 17
inches.
inches.
Network Reference on SMB Environment
•
•
If you configure more than 256 shared resources other than shared folders (such as shared
printers) shared resources other than shared folders may be displayed in the shared folder list.
printers) shared resources other than shared folders may be displayed in the shared folder list.
•
Network settings (such as the workgroup names, server names and shared names) displayed in
lists may not be displayed alphabetically.
lists may not be displayed alphabetically.