Xerox Phaser 6360 Leaflet

To select a Tray 1 (MPT) mode setting on the control panel:

Select 

, and then press the OK button.

Select 

, and then press the OK button.

Select the appropriate setting, and then press the OK button.

To select a Tray 1 (MPT) mode setting using CentreWare IS:

Launch your web browser.

Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).

Click Properties.

Select the General folder on the left navigation panel, and then select Printer Defaults.

Select the appropriate setting in the Tray 1 (MPT) Mode drop-down list.

Click the Save Changes button at the bottom of the page.

The Tray 2–N Mode setting specifies how Tray 2–N paper type is determined when you load 
paper in the tray but do not select the paper type on the control panel.

To select the Tray 2–N mode setting, use one of the following options:

■

The printer’s control panel

■

CentreWare IS

(Factory default setting)

The paper type already set for the inserted tray stays in effect.

Uses the settings from the next print job that prints from the inserted tray 
to determine the paper type.